WATERBASED STEEL CONVERSION COATING

09-00482
AUD$70.00
Stock 0

A water-based product that eliminates rust by accomplishing two functions at the same time.

addthis

First, rust is converted to ferric iron, a black organic compound. Second, a coating of clear acrylic is formed over the coated area. The surface that remains after the transformation can be either left black or coated with Stewart Systems wide range of products for the desired outcome. Product tests have shown that SS Conversion Coat has extended the life of equipment or products for several more years after probable replacement. SS Conversion Coat can be used on all rusted surfaces.

ENVIRONMENTAL ADVANTAGES:

SS Waterbased Conversion Coat is considered non-hazardous by EPA definitions and does not contain lead or chromates. The solid and semi-solid sludge produced in spraying and clean up can be flocculated, dried and sent to a "Class B" landfill. Check with your local and state regulations for proper handling.

CHARACTERISTICS:

  • Excellent durability
  • Can be applied to interior and exterior surfaces
  • Final coating can be painted
  • Distilled water is used for reduction
  • Water is used for clean-up
  • Non-Hazardous
  • Coating will not flash rust on bare metal
  • Shelf life of 1+ years
  • Unused product can be returned to container
  • Non-Flammable

USES:

  • Schools
  • Industrial Plants
  • Homes
  • Farms
  • Machinery
  • Automobiles
  • Heavy Equipment
  • Boats
  • Tools
  • Railroads
AIR QUALITY DATA:
  • VOC (Volatile Organic Compounds) .2 lb/gal, 35 gm/lt
  • Free of lead and chromates
PHYSICAL DATA:
  • Liquid - Cream Color
  • Specific Gravity: 1
  • Vapor Density:
    Heavier than air
  • Evaporation Rate:
    Slower than ether
  • Boiling Point: 212°F
  • % Solids by weight: ND
  • % Solids by volume: ND
  • Weight per gallon: 10 lbs
  • Flash Point: none
  • VOC: .2lb/gal, 35 gm/lt
No recommended products at the moment.