BATTERYMINDER 2012 12V / 2A CHARGER / MAINTAINER / DESULFATOR

11-11593
AUD$175.00

12 Volt 2 Amp (12V 2A) Charger/Maintainer/Desulfator for All Sizes and Brands of 12 Volt AGM Lead-Acid Batteries. The newest 12-volt, 2 amp, BatteryMINDer® features the latest microprocessor controller, making it a true 5-stage, fully automatic Plug 'n' Run charger/maintainer/desulfator for all sizes/brands of 12 volt AGM lead-acid batteries. No buttons to press — the diagnostic LED indicators display the battery's condition and actual state-of-charge profile. 


This charger actively monitors your battery's voltage, amperage acceptance and temperature at all times. Working through a series of charging and diagnostics stages, the internal program adjusts its output several times a second based on sensor reading to quickly and correctly charge your battery. When used as a maintainer, the BatteryMINDer is guaranteed to maximize your battery's life and storage capacity. The temperature compensated long-term float (maintenance) stage can add years of service, and patented full-time pulse desulfation is designed to reverse and eliminate battery sulfation, the #1 cause of early battery failure. Not designed for aviation batteries. **Not for aviation use**

addthis

Features
  • Will not overcharge, regardless of how long connected.
  • Temperature compensation ensures proper charge in hot or cold environments.
  • Power, polarity reversal, battery weak, load, bad cell, testing, desulfating, temperature compensation, charging stage and charge level indicators.
  • Maximizes battery life and capacity, reconditions weak batteries.
  • Pulse desulfation.
  • FCC certified.
  • Plug and run operation.
  • Water resistant (IP65).
  • Microprocessor controlled.
  • Maintains up to 6 batteries at a time.
  • Extremely efficient, low operating costs.
  • Automatic disconnect and resume if AC power is interrupted.
  • Short circuit, spark, polarity and thermal runaway protection.
  • Built-in BCI and ambient temperature sensor.
  • 6’ AC cord, 6’ DC cord with quick connector (SAE).


Specifications
  • Volts: 12V
  • Amps: 2A
  • Power Source: 100-240 VAC, 50-60 Hz
  • Works With: All sizes, types, and brands of 12 Volt flooded (filler cap) sealed batteries*
  • Temperature Compensation: Yes
  • Multiple Batteries(#): 6

No recommended products at the moment.