BOSE A20® HEADSET CABLE - 6-PIN LEMO PLUG STRAIGHT CORD ELECTRET MIC - WITH BLUETOOTH

327070-1040 1kg
AUD$737.50
Stock 0

This 67" cable includes an electret microphone with Bluetooth control module. One end of the straight cable has a single-point connector to the headset. The other end has a self-latching plug for insertion into the panel connector of an installed wire harness.

Features

  • or aircraft owners who prefer an installed, aircraft-powered headset
  • Bluetooth phone connectivity lets you receive calls wirelessly through your headset.
  • Operates on 10-32 VDC
  • No batteries needed

addthis

Q: Can you replace the cord/microphone on the Bose X with this A20 plug?

No. The Bose X and Bose A20 each have their own unique cable assemblies and they are not cross compatible.

Q: Is this the new Bose A20 headset controller with Bluetooth music audio? Will it work with the old style Bose A20 headsets?

Yes, our stock is the new A20 cable assembly that allows for Bluetooth of music audio. Yes, it will work with the original style A20 headset.

Q: Is the new Bose A20 cable connector able to function with an adapter to use the noise cancellation feature without the battery pack? I currently use a Bose A20 with the 6 pin that has a battery setup to use the noise cancellation feature.

If the airplane is equipped with a 6-pin lemo female jack, you can plug in this 6-pin lemo style cable to use the aircraft power to run the ANR. All Bose cable assemblies are now equipped with battery packs as well so you can use either one.

Q: Will this connect to an existing anr setup? And what does the other end of cable look like? Can I use my existing David Clark Mic. m7/dc

No, this intended for use with the Bose A20 headset only.

No recommended products at the moment.