TEMPEST EASY DRAIN™ AA473 OIL FILTER DRAIN TOOL

12-02248
AUD$120.45

NO DRIPS | NO SPILLS | NO MESS

 

The Tempest Easy Drain Oil Filter Drain Tool eliminates the most time-consuming aspect of an oil change - the clean up. Easy Drain reduces filter spills, saving time and eliminating the seemingly inevitable mess of changing oil.

Works with 3-1/2" diameter oil filters.
 

It's as Easy as 1...2...3!
  1. Slip Easy Drain around filter and secure by turning the butterfly knob until tight against the filter. Be sure that the Easy Drain is located at the lowest part of the oil filter can to allow maximum drainage.
  2. Attach hose to the bottom of the T-handle and then twist the T-handle to puncture the filter. Back the T-handle out to original position to allow the oil to drain.
  3. Drain oil into pan. Go grab a friend and have lunch because this process will take awhile! The oil drains slowly no matter what temperature it is because the media pack is saturated with oil. Be patient!

addthis

Q: Will the Tempest AA473 Oil Drain Tool work on a Champion filter?

Yes, this will work on Tempest, Champion, and other 3-1/2" diameter filters.

Q: Does vertically mounted mean that the filter threads up into the engine? I have a Lycoming io360 and it screws in horizontal to the back of the engine.

Per Vendor: Yes, it will work on different filters and positions. So it can work in the horizontal and vertical position.

Q: What is the max diameter filter it will fit around?

Approx max dia. 4 inches.

Q: Will the Tempest AA473 work on an RV10? Any purchasers of RV10s comment?

We do not have an aircraft application. It will work with all Tempest, Champion, and 3-1/2 inch diameter filters.